Conical compression springs
|
Mode |
Tool |
Tool set |
|
Modes for Tworzenie pojedynczej linii Modes for Narzędzie Wstaw symbol |
Conical Compression Spring
|
Machine Components |
Multiple compression spring tools share the same position on the tool set. Click and hold the mouse on the visible tool to open the Narzędzia ukryte list and select the desired tool.
The 2D conical compression spring is a linear object, while the 3D conical compression spring is a point object.
To insert a conical compression spring:
Click the tool and mode.
Kliknij, aby pokazać/ukryć parametry. place the object, and click again to set the rotation. The first time you use the tool in a file, a properties dialog box opens. Set the default parameters. The parameters can be edited later from the Object Info palette.
Conical compression springs have ends of unequal diameter. When you draw a spring, the first click defines the large end of the spring, and the second click defines the small end.
Kliknij, aby pokazać/ukryć parametry.Kliknij, aby pokazać/ukryć parametry.
|
Parameter |
Description |
|
Display (2D only) |
Select a display mode for 2D springs
|
|
Wire Diameter |
Enter the wire diameter (thickness) |
|
OD - Small End |
Specify the outer diameter of the small end of the spring |
|
OD - Large End |
Specify the outer diameter of the large end of the spring |
|
No. of Active Coils |
Specify the number of active coils in the spring |
|
Working Length |
Either specify the spring working length value, or click and drag a spring control point to define the length graphically
|
|
Spiral |
Select either a Left Hand or Right Hand spiral direction |
|
Draw Center Line (2D only) |
Draws the spring with center line(s) |
Potrzebujesz więcej informacji? Poproś o pomoc naszego wirtualnego asystenta Dexa! 